Code-3 MC SuperVisor Ford PI Sedan Manual de usuario descargar pdf (Pagina 4)

Caution: Drilling into the housing of the light bar could damage wiring or other internal components.

FIGURE 10 FIGURE 11 FIGURE 12

FIGURE 13 FIGURE 14 FIGURE 15

FIGURE 7-DRIVER SIDE SHOWN FIGURE 8 FIGURE 9

Installation and Mounting Instructions: Cont.

WARNING: This unit must be mounted within the interior passenger compartment of the vehicle only. It is not intended

for use in exterior applications. All devices should be mounted in accordance with the manufacturer’s instructions



Driver and/or passenger air bags (SRS) will affect the way equipment should be mounted. This device should be

 

mounted in the deployment area of an air bag will damage or reduce the effectiveness of the air bag and may damage



not interfere with the air bag or the SRS wiring or sensors. Mounting the unit inside the vehicle by a method other



collision. Failure to follow instructions can result in personal injury.

Wiring Instructions

Finish routing the cable as desired. It is advisable to leave an extra loop of cable when installing the light bar to allow for

future changes or reinstallations. For wiring of the Multi Color SuperVisor, see pages 5 & 6.

LED Fusing Considerations

NOTE: The Components of the Multi Color SuperVisor System are circuit protected by the Multi Color SuperVisor System CC

Board so the individual wires in the System do not require fusing.

DO NOT APPLY 12 VOLTS DIRECTLY TO THE SUPERVISOR WIRES AFTER IT IS CONNECTED TO THE

SUPERVISOR MULTI COLOR CC BOX. THE MULTI COLOR SUPERVISOR CC BOARD OR THE LIGHT

HEADS COULD BE DAMAGED BY APPLYING 12 VOLTS TO THE CC OUTPUTS!.

WARNING!

1 2 3 4 5 6 7 8 9 10 11 12

Sin comentarios

Code-3 MC SuperVisor Ford PI Sedan Manual de usuario Pagina 4