Code-3 Sprinter Manual de usuario descargar pdf (Pagina 17)

SPECIFICATIONS AND MAINTENANCE:

Specications:

Siren Section

Input Voltage 10-15VDC (negative ground)

Input Current 10 Amps @ 13.6VDC

Output Voltage Maximum 100W @ 12VDC

Operating Temperature -30 °C to +65 °C

Dimensions (HWL):

Handheld controller 0.65”X 2.0”X3.7”

Amplier 2.0″X3.6″X7.6″

Weight – Siren (approx): 4.0 lbs

Weight – Controller (approx): 0.5 lbs

Base: Black powder coat painted aluminum extrusion

Mounting – Siren: 4-hole ange mounting on base

Mounting – Controller: (Not specied), (4 mounting holes provided on base)

Compliance: SAE J1849, California Title 13

Warranty: 5 years

Maintenance:

Your Code 3 siren has been designed to provide trouble free service. In case of difculty,

consult the Troubleshooting Guide of this manual. Also check for shorted or open wires.

The primary cause of short circuits has been found to be wires passing through re walls,

roofs, etc. If further difculty persists, contact the factory for troubleshooting advice or

return instructions.

Public Safety Equipment, Inc. maintains a complete parts inventory and service facility

at the factory and will repair or replace (at the factory’s option) any unit found to be de-

fective under normal use and in warranty. Any attempt to service a unit in warranty, by

anyone other than a factory-authorized technician, without the express written consent

of the factory, will void the warranty.

Units out of warranty can be repaired at the factory for a nominal charge on either a at

rate or parts and labor basis. Contact the factory for details and return instructions. Pub-

lic Safety Equipment, Inc. is not liable for any incidental charges related to the repair or

replacement of a unit unless otherwise expressly agreed to in writing by the factory.

1 2 ... 12 13 14 15 16 17 18 19 20

Sin comentarios

Code-3 Sprinter Manual de usuario Pagina 17