Code-3 Quadrant LED Mini Bar Manual de usuario descargar pdf (Pagina 3)

This product contains high intensity LED devices. To prevent eye damage, DO NOT stare ino light beam

at close range.

This product contains high intensity LED devices. To prevent eye damage, DO NOT stare

into light beam at close range.

WARNING!

Current:

Default Flash Current (Ave): <2.0 Amps @ 13.8VDC

Operation

Flash Patterns:

The Quadrant LED Beacon is programmed with 19 different ash patterns. Refer the section below for instructions on how to

set the ash pattern.

1 Single ash 75 sim all ash (factory Default)

2 ECE R65 120FPM single ash

3 CA T13 75FPM single ash

4 Double ash 75 sim all ash

5 Swiftash ash 75 sim all ash

6 Quad Flash 75 sim all ash

7 Single Flash 75 center-split

8 Single Flash 75 clockwise

9 Single Flash 75L clockwise

10 NFPA 75FPM Quad Flash

11 Five Flash sim all

12 Modu ash sim all

13 ECE R65 Double Flash

14 125FPM Rotating Flash

15 Single Flash 120 center-split

16 Single Flash 120 clockwise

17 Single Flash 120L clockwise

18 Three Flash 120 sim all ash

19 Cycle Flash

20 OFF (For Reference only. This ash pattern cannot be stored in

the beacon's memory)

Setting the Flash Pattern: To change the ash pattern, depress the push-button switch on the lighter plug for -

- Less than 1 second for the NEXT pattern

- 1 to 3 seconds for the PREVIOUS pattern

- 3 to 5 seconds for the DEFAULT pattern

- Greater than 5 seconds to TURN OFF the beacon

Maintenance:

The beacons are completely sealed units designed to be maintenance free. Refer to the guide below for help

with troubleshooting. Should the unit be diagnosed as malfunctioning, remove unit and replace with a new

beacon.

TROUBLESHOOTING

Problem Probable Cause Remedy

Beacon does not activate a. No power to unit a. Check Lighter Plug for loose

connection

b. Damaged or shortaged cabling b. Check cables for damage

c. Defective Beacon c. Contact Service Dept.

1 2 3 4

Comentarios a estos manuales

Sin comentarios

Code-3 Quadrant LED Mini Bar Manual de usuario Pagina 3

Comentarios a estos manuales

Relacionado con productos y manuales para Encendiendo Code-3 Quadrant LED Mini Bar