Code-3 WingMan with TriCore for Crown Victoria Manual de usuario descargar pdf (Pagina 7)

Wiring Diagram - WITH ARROWSTIK®

GREEN (PATTERN SELECT)

WHITE (DIMMING)

RED (POWER)

YELLOW (RIGHT ARROW)

ORANGE (LEFT ARROW)

BLUE (LEVEL 1)

BLACK (GND)

6 HEAD ARROWSTIK® W (2) OUTER LIGHT HDS FLASHING ALTERNATELY

The WingMan™ can be congured as a 6 or 8 head ArrowStik. To change the WingMan from an 8 head ArrowStik to a 6 Light

Head conguration with the (2) Outboard Light Heads ashing alternately, remove the mounting screws that attach the Wing-

Man's Cover to the Outer Panel to gain access to the printed circuit board inside (see the exploded view on page 9). Move the

Shunt Option Jumper (JP1) on the printed circuit board to the "OPTION JP1" position as shown below. When congured for a 6

head operation the (2) Outboard Light Heads will alternate during any ArrowStik mode. Carefully replace the WingMan's Cover

over the Outer Panel and replace the Cover Mounting Screws.

Note: Be extremely careful to replace the wiring such that you don't pinch a wire when you

replace the WingMan's Cover. Test the unit to be sure that it works properly.

<---------------"OPTION JP1" Jumper Position

1 2 3 4 5 6 7 8 9 10 11 12

Sin comentarios

Code-3 WingMan with TriCore for Crown Victoria Manual de usuario Pagina 7