Code-3 920-06 Flashers Manual de usuario descargar pdf (Pagina 4)

3. Using the bolts removed in the

previous step, secure the head-

light flasher bracket to the pillar.

Make sure that the flasher is

oriented as shown in fig. 2.

4. The necessary electrical connec-

tions will now be made. Follow the

appropriate procedure for your

vehicle.

Wiring:

Vehicles equipped with Chevrolet Option SEO 6J3

1. Disconnect the headlamp harness’ water-proof connection adjacent to

the installed flasher.

2. Plug the water-proof flasher plugs into the appropriate water-proof

harness connection referenced in the previous step. Make sure that these

plugs fully engage the harness receptacles.

3. Locate the DARK GREEN/RED, 16-gauge control wire under the

instrument panel (refer to your ”Impala Police Package Owner’s Manual

Supplement” for specific information regarding the location of this wire).

4. Connect this DARK GREEN/RED wire to a customer supplied switch.

Vehicles without Chevrolet Option SEO 6J3

1. Disconnect the headlamp harness’ water-proof connection adjacent to

the installed flasher.

2. The flasher’s pin-housing connector includes a RED wire. Cut this wire at

the connector.

3. Plug the water-proof flasher connector into the appropriate water-proof

harness connection referenced in the previous step. Make sure that

these connectors fully engage the harness connectors.

4. Using appropriately sized wire, extend this RED wire to a customer-

supplied switch.

1 2 3 4 5 6 7 8

Sin comentarios

Code-3 920-06 Flashers Manual de usuario Pagina 4