Code-3 Sprinter 24 Volt Manual de usuario Pagina 1

INSTALLATION & OPERATION MANUAL1SPRINTER Remote Siren Systemwith Hand-Held Controller24VDC MODELS 3754 WITH US TONES &3764 WITH EUROPEAN TONES

10Hand Held Controller Label Designations and Functions: Item: Label: Operation: Activation: Description: Bargraph located bet

11PUBLIC ADDRESS SYSTEM:Item: Label: Operation: Activation: Description: 14. RADIO Turns on/off radio repeat function (will

12CUSTOMIZATION OF THE CONTROL HEAD: (Pass Code must be entered to make certain program adjustments,Contact your dealer to obtain Pass Code if needed

13PROGRAMMING CAPABILITIES: (Pass Code must be entered to make certain program adjustments,Contact your dealer to obtain Pass Code if needed)Item:

14 ALT Will advance the programming mode to next step.PROGRAMMING STEP #2: SELECTION OF DIFFERENT WAIL SIREN TONES: the following keys will be i

15PROGRAMMING STEP #5: SELECTION OF DIFFERENT MANUAL SIREN TONES: the following keys will be illuminated: MAN (will be illuminated )

PROGRAMMING STEP #7: ENABLES PROGRAMMING OF THE EMERGENCY key: the following keys will be illuminated: EMERGENCY (will be illuminated

17HORN RING TRANSFER FUNCTION: The connection process is the same as standard Sprinter unit. CONNECTING THE GREY WIRE TO GROUND WILL ACTIVATE THE HOR

18SPECIFICATIONS AND MAINTENANCE:Specications:Siren SectionInput Voltage 24VDC (negative ground)Input Current Max 5 Amps @ 27.2VDCOutput Voltage Maxi

Installation Notes: 19SPRINTER SIREN MODEL (3764- 24VDC) EUROPEAN TONE PROGRAM LOCATIONS:BY PRESSING THE WAIL/YELP KEYWail - Tone #1 – French Pol

2IntroductionThe SPRINTER uses an easily concealable remote hand held controller coupled to an electronic siren, all designed to meet the needs of eme

WARRANTY Code 3®, Inc.’s emergency devices are tested and found to be operational at the time of manufacture. Provided they are installed and operat

All devices should be mounted in accordance with the manufacturer's instructions and securely fastened to vehicle elements of sufcient strength

The SPRINTER amplier is not waterproof. It must be mounted in a location that is sheltered from rain, snow, standing water, etc. It must also be ins

3. To install the positive and negative power wires, strip 1/4” of insulation from the end of the wires, and install the blade connectors onto the en

4. The unit is supplied with a twelve-position, pluggable connector (white color) for connections to the speaker and other selected optional connecti

This siren system is CA T13 compliant when congured properly. Limitation of siren tones available to the end user are password protected to insure

Figure 3. 8

Figure 5.Figure 4. 9